Meter Mix Dispensing Systems are used to dispense materials at the right pressure and flow rate. There are two main types of metering assemblies: dynamic and static. A dynamic system is more flexible, enabling the processing of fluids with a large viscosity delta. It is best suited for dispenses of urethane based adhesives, which can have a very wide mix ratio.
These systems are ideal for mixing two or three part materials. They can be used to dispense a wide range of products, including high-viscosity sealants. The meter mix technology in these systems eliminates guesswork and improves uptime. The systems feature prominent visual indicators that confirm that the mixed material is being dispensed at the correct ratio. The digital display and software also allow users to download process data to refine and analyze the process.
Various pump types are used to dispense materials, including meter-mix and direct-drive systems. The meter-mix systems are designed to provide accurate volume and ratio of material. The system can be customized to fit a variety of dispensing applications. In addition to dispensing two-part materials, it can also dispense three-part materials. For example, a tackifier can dispense a four-part liquid, while a thermoplastic-based polymer dispenser will use a four-part system.
The SEE-FLO 7 meter-mix and dispensing system is a continuous flow meter-mix-dispense system. This system is designed for medium- to low-viscosity materials. It includes double-acting cylinders, which provide continuous on-demand flow while delivering metered shots of the mixed material. The SEE-FLO 7 System is air-powered and comes with a ratio check assembly and PLC controls.
The meter-mix-dispensing systems are designed to provide a precise ratio and volume of the material. The TechnoDigm systems can dispense 2 part or three-part materials, and can dispense materials ranging from thin-film to viscous to high-viscosity. The meter-mix systems can be custom-designed according to the specific requirements of the user.
In order to properly dispense multi-part fluids, meter-mix systems must be designed. The design of a meter-mix system depends on several factors, including the desired flow rate and the required mixed-composition cure rate. The meter-mix system also needs to be able to control the flow of the material and the viscosity of the filler. It is essential to consider these factors when designing a meter-mix dispensing system.
In addition to providing accurate measurements, meter-mix systems also enable efficient and cost-effective mixing and dispensing of multi-part materials. In addition to being able to adjust the flow rate and mix composition in real-time, the meter-mix system is capable of calculating the viscosity of the material. Therefore, the meter-mix system allows the correct ratio of two-part materials to be determined.
The meter-mix system can be customized for different types of materials. It is designed to deliver an accurate ratio and volume of a mix. It is compatible with a wide range of materials. Its advanced technology can deliver both high and low viscosity sealants, high and low viscosity adhesives, and high-strength silicones. And it can be compatible with any other materials.
A meter-mix system is an ideal solution for dispensing two- or three-part materials. It is capable of delivering an accurate volume and ratio and helps to improve uptime and reduce costs. The advanced technologies in the meter-mix systems eliminate guesswork and improve accuracy of the process. Its prominent visual indicators help the user to check if the meter-mixing system is performing on-ratio dispenses.
There are two main types of metering systems: single-component and dual-component. The former uses a pneumatic drive cylinder. The latter uses an air-over-oil cylinder. It is suitable for continuous production applications with small and medium viscosity ratios. The dual-component models offer the highest precision. Most of these machines can also be customized to meet a client’s specific needs.
Most meter-mix systems can be automated or manual. Whether you need a single-component or dual-component meter-mix system, you can select the type of metering technology that meets your specific application. These machines are highly customizable and can handle a wide range of viscosity. These devices can be used for different applications, ranging from cosmetics to pharmaceutical products. In-line meter-mix dispenses make the most of the dispensing process.
